3 Front + 2 Rear Level Lift Kit Fits Silverado Sierra 1500HD / 2500HD / 3500HD

  
1"-3" adjustable front + 2 rear leveling lift kit fits 2wd & 4wd 8-lug models only. FOR TRUCKS EQUIPPED WITH OVERLOAD SPRINGS, PLEASE MESSAGE US WITHIN YOUR ORDER. Fast and Easy Install with Basic Hand Tools.

Torsion Keys Allow for Adjustable Heights between 1" to 3". Torsion Keys are Twice as Strong as Factory Keys. Allows for Installation of Plus Sized Tires.

Provides Additional Ground Clearance for Obscure Terrain. Easier Accessibility for Under-Vehicle Service. 3-Bend, One-Piece Precise Product Engineering for Superior Fitment. Tapered Block Ensures Correct Pinion Angle of Driveshaft.

Helps to Eliminate Vibrations while Driving. Simple Instructions for Do It Yourself Installment.

WHICH HEIGHT COMBINATION DO I NEED TO LEVEL MY TRUCK? The best way to determine which kit you need to level your truck is to measure your current front and rear ride height from the center of the axle to the top center of the wheel well. Subtract your front and rear measurements from each other, this is the FRONT lift amount required to level the vehicle.

Add height evenly front and rear to level AND lift. HOW DOES THIS LIFT KIT INSTALL ON MY VEHICLE? These re-indexed lift torsion keys install quickly and easily by replacing your existing torsion key mounted in your truck's crossmember.

You'll need to use either a torsion unloading tool, or 5-ton gear puller to do this. Rear lift blocks simply install between your axle and OE leaf pack using our extended U-Bolts. WHY ARE YOUR LIFT BLOCKS TAPERED? Our Heavy Duty lift blocks are engineered and designed with a built-in taper to help keep your differential's pinion angle as close to factory specification as possible. This helps eliminate the possibility of driveline vibration occuring due to misaligned driveshaft/differential angles, and keeps your u-joints and driveline bearings lasting longer.

All of our steel components are finished using a proprietary teflon-blend coating. This provides the most durable and corossion resistant finish to withstand even the toughest abuse, on and off-road. DO I NEED AN ALIGNMENT AFTER INSTALL? A wheel alignment is always recommended after any components of a vehicle's suspension have been altered. This includes disassembly and reassembly. Having a proper wheel alignment will ensure proper vehicle control during on and off-road driving conditions, as well as help maintain even treadwear over your expensive tire investment. I NEED HELP, WHAT CAN I DO? Heavy Metal reserves the right to make changes to the material, design, and specifications of the replacement item without prior notice. The item "3 Front + 2 Rear Level Lift Kit Fits Silverado Sierra 1500HD / 2500HD / 3500HD" is in sale since Friday, August 2, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts".

The seller is "heavymetal-suspensions" and is located in La Mirada, California. This item can be shipped worldwide.

1. U Bolt Specs:: Square 12" Length 2.5" Width 4.05" Thread 9/16&quo
2. Color: Black
3. Finish: Corrosion Resistant Finish
4. Compatibility: Chevy GMC Silverado Sierra 1500HD / 2500HD / 3500H
5. Lift Height: 3" Front + 2" Rear
6. Interchange Part Number: Fits Chevrolet Chevy GMC 1500 2500 3500 HD
7. Adjustable: Yes
8. Manufacturer Part Number: 66819
9. Part Type: Suspension Lift Kit
10. Included Hardware: Mounting Hardware
11. Other Part Number: 66819 Fits Chevrolet Chevy GM GMC Three Inch 4X4
12. Brand: Heavy Metal Suspensions
13. Fitment Type: Performance/Custom
14. Non-Domestic Product: No
15. Drivetrain: 4WD 4x4 / 4x2 2WD
16. Warranty: Lifetime
17. Installation: Easy / DIY Instructions
18. Material: Carbon Steel
19. Key Specs: Adjustable 1" - 3" Lift Height
20. Blocks Specs: 9/16Th Pin, 5.8" Long X 2.5" Wide Blocks
21. UPC: 689755730211
22. Placement on Vehicle: Left