Improve the overall sound quality of your car audio system. Replace your vehicles factory stereo using this installation package. The Double Din GMK422 Package has been designed with high quality automotive grade ABS plastic to match the texture of your factory dash. This package includes the necessary wiring and or adapters for your installation. The wiring harness eliminates the need for cutting or modifying any of your OEM connections and can be easily reversed for reinstallation of your factory system at a later time if you decide to sell or trade your vehicle.This may help maintain your vehicles value. Please verify your vehicle's original sound system specifications before purchasing your dash kit. We have information after the vehicle Fitment area (below) and in the vehicle Compatibility area (above see the notes column on the left) that will show exclusions and/or exceptions to the stated vehicles. Works with or without Standard Bose - Does not Retain Premium Bose Systems Y91, Y93 - Retains Door Chimes.
Replace your vehicles factory stereo using this dash kit. The American International GMK422 has been designed with high quality automotive grade ABS plastic to match the texture of your factory dash. This dash kit fits the Industrys STANDARD sized Double DIN Radios ONLY. Off brand and Substandard radios may not fit.
CHECK the Manufacturers Specifications of the radio chassis and face size to assure fitment with this kit. Chassis Size: 180mm x 100mm (7.086" X 3.937"). Maximum Radio Face Size: 96.84mm x 173mm (3-13/16" X 6-13/16").
Radio Replacement Interface for General Motors Vehicles. The LCGM24 allows the replacement of a factory radio in select General Motors vehicles with Class II radios. Using this interface will retain factory features such as warning chimes and provides a data-bus generated 12-volt retained accessory power output (RAP). RAP keeps the radio powered after key-off, just like the factory system. The LCGM24 also issues data commands that maintain a "healthy" system status to other vehicle systems.
PLEASE NOTE: This Interface is intended for use in vehicles without OnStar® or PREMIUM Bose® (Y91) or when OnStar® or Bose® does not need to be retained. Wire your aftermarket radio to the LCGM24's harness according to the wiring connections chart. The red accessory wire will support up to 10 amps of current draw. Remove the factory radio and plug in the LCGM24's 24-pin harness into the factory vehicle harness.
Using the supplied length of wire, mount the interface within the dash of the vehicle with double sided tape or wire ties. There are no adjustments to make, just mount your aftermarket radio and re-install your factory dash panels and you're done! The LED on the interface will turn on & the +12v accessory wire will turn on.
Turn on the radio & check balance & fade. Turn off vehicle & remove key. RAP will be active & keep the radio on for 10 minutes or until the drivers door is opened.
The LED & radio will turn off when RAP turns off or the drivers door is opened. Antenna Adapter is used to connect your factory antenna to a standard aftermarket radio input.This can be used in conjunction with a. Adapter (NOTE: We offer both adapters in a single kit) to add FM modulated devices where radio replacements are not available.
NOTE: We advise that you retain all factory screws or other fasteners when removing the factory system as these may be needed when installing your new aftermarket stereo. Depending upon vehicle configuration other fasteners may be required. This complete kit comes with everything to mount your aftermarket radio to your vehicle but does not include the radio.
Volunteer Audio has been a family owned and operated, car-audio-installation and retail business since 2001. We are Authorized On-Line Retailers for the brands we sell. You are protected from receiving grey-market, damaged, or altered products that may be available at other stores or websites. Thanks to our loyal customers, business has grown!
In addition to our experienced sales and customer service team, Volunteer Audio has MECP (Mobile Electronics Certified Professional) technicians and installers on staff to assist you with technical questions. Whether you are a first-time customer, or one of our many returning friends, we are committed to providing 100% satisfaction in products and service.
Thanks for shopping with us! There will be two tracking numbers provided. At Volunteer Audio we want to make sure that you are 100% satisfied.Contact Volunteer Tech Support for authorization before returning any defective items. Items not in like-new condition, including but not limited to: items missing original product packaging, used items, installed items, abused or physically damaged items, items missing parts, damaged packaging and items damaged due to improper return packaging, and items with a different or defaced serial number. We will be happy to answer your questions or help you get the right part the first time. The item "Double Din Radio Stereo Dash Install Kit + Harness fits Select GM Vehicles + SWC" is in sale since Tuesday, November 19, 2013. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Other Interior Parts & Accessories". The seller is "volaudio" and is located in Oliver Springs, Tennessee. This item can be shipped worldwide.