Front End Suspension Rebuild Kit Fits 1963 1967 Chevrolet Corvette

  
This Kit is constructed using High-Quality OEM. 1963, 1964, 1965, 1966, and 1967 Chevrolet Corvette. These parts are Factory Design and will only work with Stock Vehicles.

This Kit Contains All Of The Pieces Below. Inner Tie Rod Ends, Right and Left. Outer Tie Rod Ends, Right and Left. Tie Rod Sleeves (2 Each).

Sway Bar Bolts (2 Each). Sway Bar Bushings (2 Each) - 17.5 mm (0.68 Inch). Upper Ball Joints (2 Each).

Lower Ball Joints (2 Each). Upper Control Arm Bushings (4 Each). Lower Control Arm Bushings (4 Each).

The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.