The TVS2650'Hot Rod' kit for LS3 or LSA based engine applications is designed for all GM engines with LS3 style rectangle port heads. Designed to work with LS3 and LSA drive systems, this jackshaft-based system is geared for your high horsepower hot rod and race applications capable of up to 1,500HP, with appropriate engine and vehicle modifications. This supercharger will fit GM small block V8 engines with LS3 style cylinder heads.Vehicle fitment is the end user's responsibility. Vehicle installation may require a new hood, or cut out in the hood to accommodate supercharger, plus possible cowl trimming. The kit includes only the pictured main supercharger head unit, intercooler and intake combination, along with the front mounting bracket.
No heat exchanger, lines, pump, tank, fuel system or tuning is provided, though all are required to run this supercharger. There are many different options available from Magnuson, please view the details section below for the details on this kit.
For the many other Magnuson Supercharger kits. WHAT TO EXPECT FROM THIS PRODUCT. These supercharger kits are the most complete available, including everything needed for installation. This includes all mounting brackets for the blower, pullies, belts, intercooler, all the tubing, piping, fittings and clamps and even oil for the self contained lubricating system. Many customers install in their garage or driveway over a weekend.Highest efficiency positive displacement supercharger available in the market delivers maximum performance with dramatically lower inlet air temperatures Magnuson TVS2650 Supercharger system complete with LS3 specific lower manifold, intercooler and jackshaft drive system 2.65L displacement Roots-type supercharger with Eaton TVS(r) Technology comprising of the high helix, four-lobe rotors for maximum supercharger efficiency across entire speed range, capable of 24,000rpm and 2.4 pressure ratio Patent-pending Supercharger housing designed to deliver huge airflow at high engine speeds for maximum horsepower levels Quick change, cartridge style jackshaft system with high torque/low inertia carbon fiber driveshaft High flow charge air cooler and massive 1-inch (-16ORB) ports reduce coolant restriction allowing maximum flow with extremely high cooling efficiency. The coolant ports accept most aftermarket fittings, allowing endless customizability High flow inlet duct designed for electronic throttles with GM LT5 bolt pattern Also works with 112mm Nick Williams throttle body or Magnusons 109mm mechanical throttle body P/N 98-05-40-007 Set up for port injection fuel system with hard anodized, extruded aluminum fuel rails with ½ thru bore Includes press-on hub for 2-piece pulley (not included) and interchangeable rear cog belt system allowing for drive ratio optimization Supplied with standard 32 and 34 tooth cogs for up to 6% overdrive of front pulley Additional 30-38 cog tooth pulleys available in two tooth increments Fast response, vacuum bypass system designed to unload supercharger at engine idle speeds and allow intercooled air to be recirculated through the supercharger for rapid cooldown 1,200+ RWHP capable with appropriate engine upgrades Fuel Pump: Not Supplied Fuel Injectors: Not Supplied Computer/Ignition Mods. Not Supplied TREperformance is an Authorized Priority Dealer of Magnuson Superchargers. We have Magnuson supercharger systems to fit almost every performance application!
We do not lower invoice values since it is a violation of US and International custom laws. Suite D7 Costa Mesa, CA 92627. The item "GM Chevy LS3 LSA 6.2L V8 Magnuson TVS2650R Supercharger Intercooled Hot Rod Kit" is in sale since Thursday, August 20, 2020.
This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Superchargers & Parts". The seller is "treperformance" and is located in Costa Mesa, California. This item can be shipped worldwide.