Pistons, Rings, Rods & Parts. Head Gasket Set Bolts Lifters Fit 07-16 Chevy GM LS 6.0L 6.2L Non-AFM. Guaranteed to fit and meet the specifications of the OE parts being replaced.Utilizes the latest in design and material technology, ensuring quiet and maintenance-free experience. Produced under strictly observed quality under highest ISO 9001:2000 international standards.
Advanced manufacturing technology ensures durability and optimum operation. Specialized designs yield significant and noticeable improvements to your car engine. Remark: For 2004 engines there are two different designs for the head bolts. 1st design head bolts have 16 Long Bolts: 150mm, 4 Short Bolts: 100mm, 10 Small Bolts: 45mm.
2nd design head bolts have 20 Long Bolts: 100mm, 10 Small Bolts: 45mm. This kit ONLY FITS engine with 2ND DESIGN HEAD BOLTS (20 long bolts: 100mm, 10 small bolts: 46mm). The lifters in this kit only fit engine without Active Fuel Management (AFM) sytem. 24/7 Support Ask product experts.Part Numbers: HS8-10462, HB10448L, SL1000, LF306(x16). Allow the engine to reach its maximum RPM potential. Decrease friction and increase longevity when directly compared to flat tappet lifter. Perfect performance replacements for stock hydraulic roller lifters or retro-fit hydraulic roller lifters for non-roller blocks. Replace Part #: HS26192PT-5, ES72220, ES72390. The hydraulic lifter in a car's engine uses oil pressure to adjust a plunger and take up all the clearance in the valve train. This helps to ensure less engine noise and longer reliability, due to less wear and tear. Hydraulic lifters can begin to fail through normal use of a vehicle. After several years of running the engine of your vehicle, the hydraulic lifters within the valves can become laden with sludge, and other contaminants in the valve, that they start to wear out. New hydraulic lifters can make a tremendous difference in the way that a vehicle runs as well as how the engine sounds. The head gasket is the key component of the engine. It is compressed between the engine block and the cylinder head.
The head gasket seals in the internal combustion process to make sure maximum compression is achieved and also keeps coolant and oil from mixing together as the two fluids travel from the engine block to the cylinder head. Therefore the cylinder head gasket, and lifters are an important part of your engine.
They should always be in perfect condition and should be maintained properly. So, if you notice that this part is showing signs of excessive wear, have them replaced immediately. Be sure to have your worn out parts replace with our aftermarket replacement parts set as soon as they start to give you trouble. Multiple Layers Steel (MLS) Head Gasket. Intake Manifold Gasket (Rectangular Port).30 Cylinder Head Bolts (20 Long Bolts: 100mm, 10 Small Bolts: 45mm). 16 NON-AFM (Active Fuel Management) Hydraulic Roller Lifters / Engine Valve Adjusters.
Return item must be well packed in original manufacturers packing and contain everything that was originally provided such as packing materials, hardware, manuals, protective wrap/caps, instruction, etc. There is no-exceptions policy ensures the quality of the components you receive. No exchanges will be made for any product that has been damaged, misused or improper installed.
We always recommend professional installation of our products. Mizumo Auto Providing quality OEM production replacement parts to engine rebuilders, specialty warehouses, and distributors for more than a decade.
Our product lines represent affordability, quality, and performance to meet the demands of todays challenging market. In addition, Mizumo parts meet or exceed the strict standards of QS9000, ISO9001, and ISO9002.
Our gasket line is manufactured with non-asbestos materials, the finest silicon rubber, Viton valve stem seals, and graphite or MLS (multiple layer steel) head gaskets for superior sealing. Our gasket product line provides our customers with competitive cost coverage on popular late model domestic applications. For all your early to late model import needs we carry a full range of gaskets and internal engine parts in addition to our new product lines of: Timing Belts & Kits, Water Pump, Head Bolts. Mizumo Auto is located in Southern California, the most diversified import automotive market in the nation, thus, allowing the company to continually study market trends to help forecast future product needs, and enhance development to exceed industry standards of both quality and performance.
Mizumo Auto offers national sales and support services along with a fast program to insure our clients get the parts they need now. The item "Head Gasket Set Bolts Lifters Fit 07-16 Chevy GM LS 6.0L 6.2L Non-AFM" is in sale since Wednesday, September 18, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Gaskets\Cyl. Head & Valve Cover Gasket". The seller is "mizumoauto" and is located in El Monte, California, United States.
This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.